Description
125mm Hammer drill driver and angle grinder + 2 4.0Ah batteries and 2.4A battery charger - ENG PRO
This ENG PRO tool kit includes the 1B20-AP40-S hammer drill driver, 1B20-SA12-S angle grinder, two 2.0Ah ONE4ALL lithium-ion batteries and a specific battery charger. Along with this kit, a TOOL BAG is supplied, which can be used to hold the products and transport them very easily.
The ENG PRO impact wrench has a maximum torque of 40 Nm, reaches the speed of 1500 rpm and an impact rate of 21000 bpm. It is also equipped with a sturdy steel keyless chuck with a maximum capacity of 13 mm. The weight of the machine body alone is 1300 g.
The ENG PRO angle grinder can be equipped with abrasive or cutting discs with a maximum diameter of Ø 125 mm, reaches a speed of 10000 rpm, and is also equipped with a practical side handle, which can be removed and positioned in the center or on the sides of the tool, depending on the preferences of right- or left-handed users.
Technical data:
HAMMER DRILL DRIVE
| Speed | 0-1500 rpm |
| Percussion number | 0-21000 bpm |
| Chuck | 2-13 mm |
| Maximum torque | 40 Nm |
| Clutch adjustments | 16 |
| Weight | 1300 g |
ANGLE GRINDER
| Speed | 0-10000 rpm |
| Compatible discs | 115-125 mm |
| Flange nut | M14 |
| Weight | 1700 g |
TWO 20V 4.0Ah BATTERIES
| Voltage | 20V |
| Capacity | 4.0Ah / 2000 mAh |
| Type | Li-Ion |
| Composition | 10 cells |
| Charge cycle time: | 2 h |
| Dimensions | 120x80x65 mm |
| Weight | 450g |
| Charger included | Yes |