Description
LEVER-LESS TYRE CHANGER - Ravaglioli
Top series - 'fully automatic'
Leverless' operation (Patented)
19'' TFT monitor
INTUITIVE CONSOLE
Makes it easy for the operator to learn. Equipped with buttons for roller and tool movement.
PC OPERATION
- You enter the tyre data
- The machine automatically selects the most suitable programme from among - SOFT - STANDARD - RF/UHP
The operator can decide to use another programme (the software prevents the use of unsuitable programmes)
- The upper and lower rollers are positioned at the rim edge and the valve in the start position.
- By giving consent, the tyre changer performs the set work, with minimal intervention by the operator.
- At any time the operator can intervene by stopping the automated operation, and then restart normally (no need to restart from the beginning of the cycle).
Fully automatic operation with resident programmes
AIMED WORK
After switching on, the tyre changer asks you to select the desired activity:
- removing/mounting tyres (normal activity)
- repeated disassembly (e.g. dismantling to separate tyre from rim)
- repeated assembly (e.g. in car factories) Pre-set and dedicated cycle reduces working time
AUTOMATIC OPERATION
- You place the top roller at the edge of the rim.
- Then you put the valve in the start position.
- By giving consent, the tyre changer works automatically (programme G1200).
- Once the first wheel is finished, the start position is done very quickly and automatically to repeat the work "n" times.
PNEUMATIC BEAD BREAKER DISCS:
Made of non-scratch material to fully protect the rim.
The rim-edge detector allows the roller to advance automatically, enabling it to work on the bead without damaging the tyre sidewall.
Possibility of customer data entry
DATA BANK
Up to 100,000 wheel types can be stored with:
- customer name
- vehicle registration number
- notes
DATA TRANSFER
Transfer of stored data between tyre changers: particularly useful for those with several tyre changers:
- in the same workshop (large tyre shop, tyre or vehicle manufacturer)
- in different shops (chain of tyre dealers, group of dealers) Customised data and brief training allow the most difficult tyres to be dismantled by inexperienced operators.
Database of executed wheels
Automatic or manual procedures
Spindle with central locking - also suitable for reverse wheels with 3 working heights
Floating plate for easy wheel clamping (patented)
Electric motor with stepless speed control
Synchronised tool movement with servo drive
For all tyre types with max. tyre diameter 54' (1370 mm)
The central locking, also suitable for inverted wheels, takes place via a central pin with cone. The effort is minimal thanks to the special wheel support plate, a floating type with self-locking effect.
For rim diameters from 10' to 34' and max. width 15'
Complete with quick-release clamping device including centring cone and plastic protection
Double taper wheel centring adapter
Wheel plate protection (1 piece)
Dragger with extension and protection
Double pneumatic vertical roller bead-breaker with electronic control
Pedal-operated bead pre-inflator with pressure gauge and balancing valve
3 OPERATING MODES
- Standard
- Automatic (similar to G1200)
- From PC
COD | Tubeless Inflator |
G1500.3IT | Yes |
G1500.3 | No |
Delivery in 20 days