/
Description
Drill driver TPC 18/4 with percussion I-BASIC - Festool 577053
Description:
The Quadrive Festool TPC 18/4 I-Basic-5,2 percussion drill driver powered by 18v lithium batteries thanks to its powerful EC-Tec Brushless motor ensures very high performance, with 40% more torque in speed 2 compared to to its predecessor for the complete crossing with 8 mm screws, as well as extreme robustness.
The 18v 577053 professional screwdriver is fitted with the innovative KickBackStop electronic system which offers greater protection to the operator by cutting off power to the motor to counter dangerous twisting of the wrist in the event of sudden jamming of the bit.
Thanks to the Quadrive technology, the TPC 18/4 I-Basic-5.2 drill offers the possibility of selecting 4 different speeds that can be selected at will to meet the needs of the moment, speed 1 for demanding screwing up to 10 mm, speed 2 for rapid screwing up to 8x300, speed 3 for drilling operations up to 20 mm in beams and speed 4 for rapid drilling operations with medium-small bits or Forstner-type cutters up to 35 mm.
Thanks to the special gear selector you can switch from one process to another without any problem thanks to the possibility of switching from any speed to any other without intermediate stages.
The fantastic FastFix system will allow you to use any spindle of the 18v screwdrivers in the Festool range by replacing them with extreme simplicity and without the aid of tools.
Thanks to the fantastic Centrotec tool holder chuck you can switch from drilling to countersinking or screwing in the blink of an eye, significantly optimizing your production yield.
The latest generation of EC-TEC motors which offer greater torque and speed even under load, work by transforming the energy of the battery without loss of power, furthermore set up with electronic management thanks to dedicated microprocessors which constantly control and monitor the temperature and operating voltage.
The TPC 18/4 I-Basic screwdriver is suitable for operating in any environment, in fact thanks to the green adjustment ring, by simply turning it, you can change the angle of the spindle with extreme simplicity so as to respond to any need at any time.
Born to respond to professional needs, which require performing and practical tools, it offers high comfort thanks to the practical belt clip, which can be applied as desired on both sides, a convenient magnetic bit holder so as to always be ready but, in particular, at the Optimized torque setting so as to avoid unintentional adjustments by optimizing the force in relation to the material.
Designed with compact dimensions and well-balanced weight, this professional screwdriver offers great handling even during prolonged use, reducing operator fatigue.
Ideal for creating frame structures, sub-structures in wood, screwing and drilling work in wood, plastic or metal, drilling up to 70 mm in wood with Forstner bits and screwing into wood with screws up to 10x300 mm, it is a battery-operated tool with outstanding performance and offering compatibility with the entire range of tools of the same voltage.
By purchasing this fantastic drill you can optimize your work thanks to the reading of operating data as well as the possibility of customized settings on the tool using the Festool Work App via the IoT system.
This model offers unparalleled versatility of use, the FastFix system allows it to be combined with numerous chucks and corresponding accessories that can be purchased as optional if not included in the standard equipment, which make the TPC an extremely versatile tool.
The 18v Festool TPC 18/4 I-5,2 drill driver is supplied with 18 V 5.2 Ah battery, belt clip, auxiliary handle, PZ 2 bit, FastFix 13 mm quick-release chuck KC 13-1/2- MMFP, Centrotec chuck, Centrotec BH 60 CE-Imp magnetic bit holder and Systainer case SYS3 M 187.
The charger is not included.
Data sheet:
Diet
Drums
Power
19th
Battery type
Lithium
Battery provided
Yes
Charger provided
No
Battery capacity
5.2 Ah
Typology
Cordless impact drill
Capacity
70.0mm (Wood)
13.0mm (Steel)
10.0mm (Masonry)
Screw capacity
10x300mm (Wood)
Strokes per minute
1 - 57.600 c/min
No-load speed
1 - 500 - 800 - 2.350 - 3.600 rpm
Tightening torque
3 - 20 - 50 - 75 nm
No speed
5
Spindle
Self-locking
Spindle capacity
1.5 - 13mm
Attack
1/4"
Percussion
Yes
Electronic switch
Yes
Electronic speed control
Yes
Reversible
Yes
Led lighting
Yes
Functions
KickBackStop
Usage
Joinery, carpentry, constructor
Compatible batteries
BP 19
Compatible chargers
TCL 6 - SCA 9
Motor
EC-TEC Bushless
Weight
1,9/2,0 Kg (with battery)
Carrying case
Yes
Description:
The Quadrive Festool TPC 18/4 I-Basic-5,2 percussion drill driver powered by 18v lithium batteries thanks to its powerful EC-Tec Brushless motor ensures very high performance, with 40% more torque in speed 2 compared to to its predecessor for the complete crossing with 8 mm screws, as well as extreme robustness.
The 18v 577053 professional screwdriver is fitted with the innovative KickBackStop electronic system which offers greater protection to the operator by cutting off power to the motor to counter dangerous twisting of the wrist in the event of sudden jamming of the bit.
Thanks to the Quadrive technology, the TPC 18/4 I-Basic-5.2 drill offers the possibility of selecting 4 different speeds that can be selected at will to meet the needs of the moment, speed 1 for demanding screwing up to 10 mm, speed 2 for rapid screwing up to 8x300, speed 3 for drilling operations up to 20 mm in beams and speed 4 for rapid drilling operations with medium-small bits or Forstner-type cutters up to 35 mm.
Thanks to the special gear selector you can switch from one process to another without any problem thanks to the possibility of switching from any speed to any other without intermediate stages.
The fantastic FastFix system will allow you to use any spindle of the 18v screwdrivers in the Festool range by replacing them with extreme simplicity and without the aid of tools.
Thanks to the fantastic Centrotec tool holder chuck you can switch from drilling to countersinking or screwing in the blink of an eye, significantly optimizing your production yield.
The latest generation of EC-TEC motors which offer greater torque and speed even under load, work by transforming the energy of the battery without loss of power, furthermore set up with electronic management thanks to dedicated microprocessors which constantly control and monitor the temperature and operating voltage.
The TPC 18/4 I-Basic screwdriver is suitable for operating in any environment, in fact thanks to the green adjustment ring, by simply turning it, you can change the angle of the spindle with extreme simplicity so as to respond to any need at any time.
Born to respond to professional needs, which require performing and practical tools, it offers high comfort thanks to the practical belt clip, which can be applied as desired on both sides, a convenient magnetic bit holder so as to always be ready but, in particular, at the Optimized torque setting so as to avoid unintentional adjustments by optimizing the force in relation to the material.
Designed with compact dimensions and well-balanced weight, this professional screwdriver offers great handling even during prolonged use, reducing operator fatigue.
Ideal for creating frame structures, sub-structures in wood, screwing and drilling work in wood, plastic or metal, drilling up to 70 mm in wood with Forstner bits and screwing into wood with screws up to 10x300 mm, it is a battery-operated tool with outstanding performance and offering compatibility with the entire range of tools of the same voltage.
By purchasing this fantastic drill you can optimize your work thanks to the reading of operating data as well as the possibility of customized settings on the tool using the Festool Work App via the IoT system.
This model offers unparalleled versatility of use, the FastFix system allows it to be combined with numerous chucks and corresponding accessories that can be purchased as optional if not included in the standard equipment, which make the TPC an extremely versatile tool.
The 18v Festool TPC 18/4 I-5,2 drill driver is supplied with 18 V 5.2 Ah battery, belt clip, auxiliary handle, PZ 2 bit, FastFix 13 mm quick-release chuck KC 13-1/2- MMFP, Centrotec chuck, Centrotec BH 60 CE-Imp magnetic bit holder and Systainer case SYS3 M 187.
The charger is not included.
Data sheet:
Diet
Drums
Power
19th
Battery type
Lithium
Battery provided
Yes
Charger provided
No
Battery capacity
5.2 Ah
Typology
Cordless impact drill
Capacity
70.0mm (Wood)
13.0mm (Steel)
10.0mm (Masonry)
Screw capacity
10x300mm (Wood)
Strokes per minute
1 - 57.600 c/min
No-load speed
1 - 500 - 800 - 2.350 - 3.600 rpm
Tightening torque
3 - 20 - 50 - 75 nm
No speed
5
Spindle
Self-locking
Spindle capacity
1.5 - 13mm
Attack
1/4"
Percussion
Yes
Electronic switch
Yes
Electronic speed control
Yes
Reversible
Yes
Led lighting
Yes
Functions
KickBackStop
Usage
Joinery, carpentry, constructor
Compatible batteries
BP 19
Compatible chargers
TCL 6 - SCA 9
Motor
EC-TEC Bushless
Weight
1,9/2,0 Kg (with battery)
Carrying case
Yes