LEVER-LESS TYRE CHANGER - Ravaglioli

Top series - 'fully automatic'

Leverless' operation (Patented)

19'' TFT monitor

INTUITIVE CONSOLE

Makes it easy for the operator to learn. Equipped with buttons for roller and tool movement.

PC OPERATION

You enter the tyre data
The machine automatically selects the most suitable programme from among - SOFT - STANDARD - RF/UHP

The operator can decide to use another programme (the software prevents the use of unsuitable programmes)

The upper and lower rollers are positioned at the rim edge and the valve in the start position.
By giving consent, the tyre changer performs the set work, with minimal intervention by the operator.
At any time the operator can intervene by stopping the automated operation, and then restart normally (no need to restart from the beginning of the cycle).

Fully automatic operation with resident programmes

AIMED WORK

After switching on, the tyre changer asks you to select the desired activity:

removing/mounting tyres (normal activity)
repeated disassembly (e.g. dismantling to separate tyre from rim)
repeated assembly (e.g. in car factories) Pre-set and dedicated cycle reduces working time

AUTOMATIC OPERATION

You place the top roller at the edge of the rim.
Then you put the valve in the start position.
By giving consent, the tyre changer works automatically (programme G1200).
Once the first wheel is finished, the start position is done very quickly and automatically to repeat the work "n" times.

PNEUMATIC BEAD BREAKER DISCS:

Made of non-scratch material to fully protect the rim.

The rim-edge detector allows the roller to advance automatically, enabling it to work on the bead without damaging the tyre sidewall.

Possibility of customer data entry

DATA BANK

Up to 100,000 wheel types can be stored with:

customer name
vehicle registration number
notes

DATA TRANSFER

Transfer of stored data between tyre changers: particularly useful for those with several tyre changers:

in the same workshop (large tyre shop, tyre or vehicle manufacturer)
in different shops (chain of tyre dealers, group of dealers) Customised data and brief training allow the most difficult tyres to be dismantled by inexperienced operators.

Database of executed wheels

Automatic or manual procedures

Spindle with central locking - also suitable for reverse wheels with 3 working heights

Floating plate for easy wheel clamping (patented)

Electric motor with stepless speed control

Synchronised tool movement with servo drive

For all tyre types with max. tyre diameter 54' (1370 mm)

The central locking, also suitable for inverted wheels, takes place via a central pin with cone. The effort is minimal thanks to the special wheel support plate, a floating type with self-locking effect.

For rim diameters from 10' to 34' and max. width 15'

Complete with quick-release clamping device including centring cone and plastic protection

Double taper wheel centring adapter

Wheel plate protection (1 piece)

Dragger with extension and protection

Double pneumatic vertical roller bead-breaker with electronic control

Pedal-operated bead pre-inflator with pressure gauge and balancing valve

3 OPERATING MODES

Standard
Automatic (similar to G1200)
From PC

COD	Tubeless Inflator
G1500.3IT	Yes
G1500.3	No

Delivery in 20 days

Newsletter