Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
/
Description
| Distance between centers | mm | 1500 |
| Centre height | mm | 180 |
| Max. outside diameter | mm | 8/30 |
| Max. inside diameter | mm | 30/100 |
| Max. lenght external | mm | 1500 |
| Max. lenght internal | mm | 125 |
| Swivelling angle of workhead | - | +90° |
| Max. weight of work piece | kg | 150 |
| Center tape | M.T. | 4 |
| Spindle speed | rpm | 25-200 |
| Max. dimensions of external wheel | mm | 400x50x203 |
| Swivelling angle of wheelhead | - | +/-30° |
| Wheel spindle speed | rpm | 1670 |
| Wheelhead rapid travel | mm | 50 |
| Max. travel | mm | 246 |
| Wheelhead motor power | kW | 5.5 |
| Spindle speed | rpm | 10000 |
| Max. dimensions of internal wheel | mm | 50x25x13 |
| Min. dimensions of internal wheel | mm | 17x20x6 |
| Table travel | mm | 6 |
| Max. swivelling angle of table | - | +3°/-6° |
| Center taper | M.T. | 4 |
| Quil travel | mm | 30 |
| Motor power internal grinding | kW | 1.1 |
| Electrical supply | V/Hz | 400/50 3 PJ |
| Dimensions | mm | 4380x2000x2050 |
| Weight | kg | 6100 |
Standard equipment:
Wheel dresser
Wheel flange
Open steady rest
Close steady rest
Levelling wedge
Carbide tripped center
Wheel extractor
Balancing arbor
3-jaw chuck
Coolant tank
Coolant pump
Internal grinding coolant protection
Water-proof screen
Wwork lamp low voltage
Service wrenches
User’s manual
You may also like
Recently viewed
Invalid password
Enter